How to configure MIDI Network on Windows with DigitalLife Z-MR-1?


How to configure MIDI Network on Windows with DigitalLife Z-MR-1?

1. Install RTP MIDI.

(Note: If your computer has not installed Apple ™Bonjour™ service, you need to select "Download and install Apple ™Bonjour™, if your computer already has Apple ™Bonjour™ service, this item cannot be selected.)

 

2. Configure rtpMIDI software

After installing the software, open the rtpMIDI software, Select "Computer" (the computer name will be displayed here), select "Enabled" to enable the computer to use the network MIDI function, select the network MIDI device "DOREMiDi-MIDI", click "Connect" to connect.

 

3. In "Advanced", select the following configuration. Here, the network MIDI box and the computer have been successfully connected through the LAN!

 

4. DAW software configuration


In the DAW software, select "Computer" (the computer name will be displayed here), and you can communicate with MIDI devices over the local area network.